Programming (Model 3576)

DIY/How To

This article covers programming instructions for your model 3576 frozen machine.

Symptoms/Considerations

To see specific instructions for motor count, configuration, temperature, health and safety, space to sales, pricing, optics, and setpoint, click the setting name in the table below.

Press the blue button to enter Service Mode.

1. Run Motor Count
2. Check Configuration - Snack
3. Temperature -    Single Zone = SZ Frozen -2    or    Dual Zone = MZF -2
4. Health Safety - On
5. Space to Sales - StSn
6. Optics - On

GVC2 Prime (Red)   Part # 4214682.005

Menus in Service Mode

Motor Count	2
Configuration	4, 3,        (3 is to toggle snack/bottle) Set this to "Snack"
Temperature	4, 0, Password 2314, 7,   (7 is to toggle through all of the possible temperature settings) *If your machine is a single zone which means there is no foam barrier between the top and bottom trays, the setting should be set to "SZ Frozen -2".  *If your machine is a dual zone which mean you do have a foam barrier between the top and bottom trays, the setting should be set to "MZF -2".
Health Safety	4, 9, 2, 3,      (3 is toggle on/off)
Optics	3, 6,     (3 is to toggle on/off)     Set this to ON 3, 6, 9 (9 is to togger on/off)   Set this to "All Items On"
Pricing	5, 1, enter selection, enter price, # to save. Press * to go back to enter next item, price, # to save. Repeat
Setpoint	3, 8,  (8 is to increase degree)
	#  =  save
	*   =  back / exit

More settings can be found here in the GVC2 Control Board Manual    GVC2.pdf