GVC1 Prime Board - Firmware Update Info

Watch Tutorial Video Here

DIY/How To

How to upgrade GVC1 BLUE Prime Board firmware to Version 9383

Considerations

Control board will NOT DEX and needs to be powered off and back on to DEX

Machine occasionally goes to NO SALE and needs to be powered off and back on to go back to 0.00

Board has version 9197 or 9242

Please see attached for download and install instructions.

See below for instructions on reprogramming your board after the update 

 Futura 3589 programming

Press the service mode button

Press number 2 to count the motors – You should get 38 or 39

            If you don’t get the correct count please contact Vendnet

  Next press number 4 then number 6

            Press 6 till it says STS9 and is flashing then press # to save and then * till you are back to 0.00

Next set refrigeration – Press Service mode then 4 then 0 password 2314 then press 7 till it says COLD and is flashing then press # to save and then * till you are back to 0.00

Make sure to reset your prices.

Reset pricing -

                Press service mode

                Press #5 on front of machine

                Press #1 for individual pricing or press 3 for all pricing for the whole machine

                # to save