Flex to GVC Temperature Settings Chart

General Overview

This article shows you a temperature settings chart comparing Flex and GVC temperature settings and which temperature sensors are used for those settings.

Considerations

When comparing temperature settings between both boards,  the setting name may be called something different even if they are using the same sensor. 

The difference between a single-zone (SZ) and dual-zone (DZ) machine is the barrier between the top and bottom trays.

Flex to GVC Temp Settings Chart

Machine Type	Flex	GVC	Temp Sensors
Snack	Ambient	Snack	None
Alpine, combo, elevator	Cold Food	Cold Food	T1
MZF All Cold Food	SZ Cold Food	SZ Cold	T2, T3
Delmonte	DZ Cold Food	Dual Zone W/ HTR	T1, T2
MZF All Frozen	SZ Frozen	SZ Frozen	T2, T3
Combi, Multizone	DZ Frozen	MZF	T1, T2, T3
CB, Futura	Cold (has relay 2)	Cold	T1

T3 = Temperature sensor located to the right of the top tray (Upper zone).

T1= Temperature sensor located to the right of the middle tray under the zone barrier (Lower zone). 

T2 =  Temperature sensor located on the evaporator coil in the refer or cooling deck.