| DIY/How To |
| This article covers how to check your refrigeration and health safety setting. |
| Considerations |
This machine uses a GVC2 control board. Press the service mode button located on the top right of your control board.
| Motor Count | 2 |
| Temperature | 4, 0, Password 2314, 7, (Keep pressing 7 until COLD FOOD) |
| Health Safety | 4, 9, 2, 3, (3 is toggle on/off. If you don't have perishable item leave this setting off) |
| Setpoint | 3, 8, (8 is to increase degree. Default setpoint is 36. If you want to raise this number press 8 until you've reached the temperature you want your machine at.) |
| Relay | 0, 2 (This is how you test to make sure you refrigeration is working properly. After pressing 0 then 2, press 1 until you see that relay 1 is on. You will hear the relay click then the refrigerator will turn on. Then press 2 and hear relay 2 click which will turn the evaporator fan on. Once you're sure both relays work you are good to exit this menu) |
| # = save | |
| * = back / exit |
Comments
Please sign in to leave a comment.