Programming (Model 3589)

DIY/How To

This article covers how to program the control board settings for model 3589.

Symptoms/Considerations

To see specific instructions for motor count, configuration, temperature, health and safety, space to sales, pricing, optics, and setpoint, click the setting name in the table below.

Press the blue button to enter Service Mode.

1. Run Motor Count
2. Check Configuration - Snack
3. Temperature -    Cold
4. Health Safety - On
5. Space to Sales - StS9
6. Optics - On

                                            GVC1 (Blue)     4213952.005

                                                Menus in Service Mode

Motor Count	2
Configuration	4, 3,        (3 is to toggle snack/bottle) Set this to "Snack"
Temperature	4, 0, Password 2314, 7,   (7 is to toggle through all of the possible temperature settings) *Temperature setting for model 3589 must be on Cold
Health Safety	4, 9    ( is toggle on/off) Set this to HS n
Space To Sales	4, 6,     (6 is to toggle) Set this to "StS9"
Optics	3, 6,     (3 is to toggle on/off) Set this to "All Items On"
Pricing	5, 1, enter selection, enter price, # to save. Press * to go back to enter next item, price, # to save. Repeat
Setpoint	3, 8,  (8 is to increase degree)
	#  =  save
	*   =  back / exit

More settings can be found here in the GVC1 Control Board Manual    GVC1.pdf