| DIY/How To |
|
This article covers how to program your temperature and setpoint. |
|
Symptoms/Considerations |
| A barrier between the top and bottom trays will determine what temperature setting you will use. |
Press the blue button to enter Service Mode.
| Temperature |
4, 0, Password 2314, 7, (7 is to toggle through all of the possible temperature settings)
*If your machine is a single zone which means there is no foam barrier between the top and bottom trays, the setting should be set to "SZ Frozen -2".
*If your machine is a dual zone which mean you do have a foam barrier between the top and bottom trays, the setting should be set to "MZF -2". |
| Setpoint |
3, 8, Press 8 to edit the setpoint. Continue pressing 8 until you've reached the temp you want. When you press 8 to change the setpoint, it will go up to the 70's before restarting at the 30's.
|
This image below is showing you the temperature setpoint, and what temp sensors are used for the specific setting.
More settings can be found here in the GVC2 Control Board Manual GVC2.pdf
Comments
Please sign in to leave a comment.