GVC1 board display reads "NO SALE" - Model 3589

Troubleshooting

This article covers what to do when your GVC1 machine Display says "NO SALE"

Symptoms

Display reads "NO SALE"

Machine will not allow any purchases

The card reader says "OFFLINE BY VENDOR"

If "NO SALE" show on screen press service mode and record the error - See Below

Machine display says "NO SALE"

Causes of "NO SALE" Message

Board does not see motors - Pressing service mode shows 0 (ZERO) - Press number 2 to do a motor count - Press * key to exit service mode - If it does not count the correct motors troubleshoot motors and connections

Settings set wrong for motor configuration - DRPF - If you get a DRPF error on model 3589 some of your selections are set to CAN or BOTTLE - Model 3589 all selections need to be set to SNAC mode as they vend from coils and use I-vend sensors to detect product delivery - Press 4 then 3 and 3 until you see SnAc and it is flashing.  Press # to save and * till you are back to 0.00

Health Safety - Error such as HLS - The Health Safety setting is on is not applicable on this machine - Press 4 then 9 then 9 again till it says Hs N and press # to save and * till you are back to 0.00